Net-optics 10_100_1000 Bypass Switch Manuel d'utilisateur télécharger pdf (Page 8)

10/100/1000 Bypass Switch

Cabling Guidelines

10/100 Devices:

• If connecting to Switches or Hubs, use CAT5 cross-over cabling.

• If connecting to Routers or NICs, use CAT5 straight-through cabling.

GigaBit Devices:

• Use CAT5e straight-through cabling.

Connecting to the Network

1. Connect Network Port A to the appropriate switch, server, or router device.

2. Connect Network Port B to the appropriate switch, server, or router device.

3. Verify that the Bypass Switch Network Ports are cabled in-line between

two devices.

Figure 4: Connecting to the Network

A B A B

NetworkControl

Monitor

Bypass Switch

10/100/1000

www.netoptics.com

To network switch or routerTo network switch or router

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Net-optics 10_100_1000 Bypass Switch Manuel d'utilisateur Page 8