Net-optics 10_100BaseT Multi-Station Tap Manuel d'utilisateur télécharger pdf (Page 11)

10/100 Multi-Station Tap

Connecting to the Monitoring Device

1. Supply power to the Tap using the two redundant power supplies included

with the unit. Verify that the Power LED illuminates.

2. Connect Monitor Port A to the appropriate port on the monitoring device

using a CAT5 straight-through cable.

3. Connect Monitor Port B to the appropriate port on the monitoring device

using a CAT5 straight-through cable.

Note: _______________________________________________________________

The second power supply is available to support the ow of trafc to the

monitoring device in the event that the rst power supply becomes

unavailable.

______________________________________________________________________

Figure 6: Connecting to the Monitoring Device

4. Repeat Steps 2-3 for each monitoring device you wish to connect to the

10/100 Multi-Station Tap.

To monitoring device

19 20

15 16

11 12

7 8

3 4

High Density Tap 10/100 Ethernet

Monitor

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Net-optics 10_100BaseT Multi-Station Tap Manuel d'utilisateur Page 11