Net-optics GigaBit SX_LX to TX Tap Manuel d'utilisateur télécharger pdf (Page 10)

GigaBit SX/LX to TX Tap

Connecting to the Network

1. Connect Network Port A to the appropriate network device using a Duplex

LC cable.

2. Connect Network Port B to the appropriate network device using a Duplex

LC cable.

3. Verify that the Tap Network Ports are cabled in-line between two devices.

Note: ________________________________________________________________

The use of Singlemode (8.5µm) or Multimode (50µm or 62.5µm) cabling is

determined by the model purchased.

______________________________________________________________________

Figure 4: Connecting to the Network

www.netoptics.com

Network

ACT

LINK

GigaBit

Converter Tap

GigaBit

Converter Tap

A B

Monitor

A B

ACT LINK ACT LINK

LASER

CAUTION!

To Network Device, Switch or Router

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Net-optics GigaBit SX_LX to TX Tap Manuel d'utilisateur Page 10