Net-optics 96547iTP Manuel d'utilisateur Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
iTap GigaBit Dual Port Aggregator
18
Figure 14: Connecting Power
Checking the Installation
After you have connected the iTap to the network, monitoring device and power,
verify that the iTap is functioning correctly.
Check that at least one power LED is illuminated.
Check the link status LEDs located on the front panel to verify that traf c is
passing through the iTap.
Check the display for utilization and peak information.
Verify that the monitoring device is receiving traf c from the iTap.
Verify that the Management Port is functional by typing the iTap's IP address in
your Web browser. Net Optics' Web Manager should appear. If it does not, check
the Management Port cables and connections and verify that the Display option
in the CLI is set to ON.
Management
Port
RS232
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Commentaires sur ces manuels

Pas de commentaire