Net-optics iTap 10 GigaBit Port Aggregator Manuel d'utilisateur télécharger pdf (Page 31)

iTap 10 GigaBit Port Aggregator

Chapter 4

Using Web Manager

This chapter describes how to monitor and control individual iTap Port Aggregators

using Net Optics Web Manager software.

The iTap Port Aggregator has built-in support for remote control from any com-

puter with an Internet browser and access to the iTap’s IP address. Web Manager

is a browser-based interface that enables you to change settings, view status, and

retrieve data remotely. Web Manager supports all common browsers.

In this chapter, you will learn to:

• Access Web Manager

• View iTap Port Aggregator System Status from Web Manager

• View iTap Trafc Statistics from Web Manager

• Change the iTap Port Aggregator System Conguration from Web Manager

Note: ____________________________________________________________________

To access Web Manager, the Web browser must have a path to the iTap Port

Aggregator Management Port. In addition, the Management Port option in the

CLI must be set to ON. For more information, see

Congure the iTap Port

Aggregator Using the CLI.

__________________________________________________________________________

Access Web Manager

To access Web Manager:

1. Open an Internet browser on your computer.

2. Enter the iTap’s IP address in the URL box and press Enter. The default IP

address is 192.168.1.2. The Web Manager page appears. (See the gure on the

following page.)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Pas de commentaire

Net-optics iTap 10 GigaBit Port Aggregator Manuel d'utilisateur Page 31