Net-optics iTap 10 GigaBit Port Aggregator Manuel d'utilisateur télécharger pdf (Page 59)

iTap 10 GigaBit Port Aggregator

Command Sub-Command Syntax Description

Set

(continued)

Dropbad Port set dropbad port

Where <port ID> is A or B

and <parameter> is

1 = Drop packets with CRC

errors

2 = Pass packets with CRC

errors

(other values not applicable)

Note: Applies to CRC errors

as the packet is received at

the Monitor Port

Psize Port set psize port

Where <port ID> is A or B

and <parameter> is

64 to 12000

(other values not applicable)

Note: Sets the maximum

packet size; packets larger

than <psize> are discarded

and counted in the oversize

packet counter

Slice Port set slice port

Where <port ID> is 1 or 2

and <parameter> is

1 = Packet slicing on

2 = Packet slicing off

(other values not applicable)

Ssize Port set ssize port

Where <port ID> is 1 or 2

and <parameter> is

64 to 12000

(other values turn packet

slicing OFF)

Note: Sets the packet slicing

size; only <ssize> bytes are

passed when packet slicing

is enabled

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Pas de commentaire

Net-optics iTap 10 GigaBit Port Aggregator Manuel d'utilisateur Page 59